Free 300-510 Sample Questions — Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) (300-510) is a professional - concentration-level Cisco certification exam. The blueprint splits the exam across 6 domains, starting with Service Provider Architecture, OSPF and IS-IS, BGP. On exam day you face around 60 questions in 90 minutes, in formats such as multiple choice, drag and drop, lab simulations. The 10 questions below are free samples written to match that style: answer each one first, then reveal the correct answer and note which topics you miss. The 300-510 is rated hard in difficulty, and most candidates prepare with at least 36 months of hands-on experience. Because every answer is revealed in place, you can work through the whole set without leaving this page. Work through all 10 samples before deciding whether to buy the full 34+ question PDF.

  • 10 free questions
  • pass mark 825/1000
  • 90 min
  • $300 official fee
  • blueprint v1.0
  • Every free question shows the correct answer
  • Questions follow the official 6-domain blueprint
  • No account or email required
  • 34+ questions in the full PDF

Looking for more? Click here to get the full PDF with 34+ practice questions for $5 for offline study and deeper preparation.

Question 1

While configuring Cisco NSF awareness, a network engineer enters the bgp graceful-restart command after the BGP session is established in a router that runs IOS XE Software. Graceful restart capabilities are not exchanged. Which two actions should be taken? (Choose two.)

  • A. Reload the router
  • B. Verify that BGP route dampening is configured
  • C. Reduce BGP convergence time
  • D. Issue the clear ip bgp * command
  • E. Issue the show ip bgp neighbors command
Show Answer
Correct Answer:
  • D. Issue the clear ip bgp * command
  • E. Issue the show ip bgp neighbors command
Question 2

What is the purpose of ACL type prefix set entries in RPL prefix sets?

  • A. They hold IPv6 prefix match specifications
  • B. They hold IPv4 or IPv6 prefixes that do not match specifications
  • C. They hold IPv4 or IPv6 prefix match specifications
  • D. They hold IPv4 prefixes that do not match specifications
Show Answer
Correct Answer:
C. They hold IPv4 or IPv6 prefix match specifications
Question 3

What is a characteristic of a segment routing mapping server?

  • A. It serves multiple VRFs
  • B. It applies SID mappings from one IGP instance to another IGP instance
  • C. It must be placed in the core of the network
  • D. It must have an IGP adjacency
Show Answer
Correct Answer:
D. It must have an IGP adjacency
Question 4

An engineer wants to map a multicast IP address to a multicast MAC. How many bits are used to make the conversion?

  • A. low-order 23 bits
  • B. higher-order 23 bits
  • C. lower-order 24 bits
  • D. high-order 24 bits
Show Answer
Correct Answer:
A. low-order 23 bits
Question 5

Which BGP well-known attributes are preserved between peers with a BGP confederation?

  • A. next-hop and local-preference
  • B. next-hop and weight
  • C. origin and MED
  • D. originator and origin
Show Answer
Correct Answer:
A. next-hop and local-preference
Question 6

An engineer is working to implement segment routing protocol on the customer’s core network. Which step should the engineer take before the segment routing is enabled and is running with BGP?

  • A. Segment routing must be configured with EIGRP
  • B. Segment routing must be configured with ISIS
  • C. MPLS must be configured
  • D. Explicit-null must be configured for all neighbors
Show Answer
Correct Answer:
C. MPLS must be configured
Question 7

What is a feature of SRGB label values?

  • A. They are locally significant
  • B. They are used for adjacency segment identifiers
  • C. They allow IS-IS and OSPF to use overlapping ranges on a domain
  • D. They are assigned to segment routing nodes and have global significance throughout the domain
Show Answer
Correct Answer:
D. They are assigned to segment routing nodes and have global significance throughout the domain
Question 8

Which attribute is used to instruct the router that packets must be processed by an ASA that is associated with the segment?

  • A. service SID with service instructions
  • B. adjacency SID with unidirectional adjacency instructions
  • C. node SID that identifies a specific network device
  • D. prefix SID that represents a specific route prefix
Show Answer
Correct Answer:
A. service SID with service instructions
Question 9

Which difference must an engineer consider when choosing whether to implement OSPF or IS-IS as the routing protocol on the network?

  • A. The OSPF DR election process is deterministic, and the IS-IS DS election process is not deterministic
  • B. To support fast convergence, OSPF uses the LSA arrival timer and IS-IS uses the PRC-interval timer
  • C. IS-IS supports ordinary, stub, totally-stub, and NSSA areas, but OSPF supports only stub areas
  • D. IS-IS links are associated with either a Level 1 area or a Level 2 area at one time, but OSPF links are associated with multiple areas at one time
Show Answer
Correct Answer:
B. To support fast convergence, OSPF uses the LSA arrival timer and IS-IS uses the PRC-interval timer
Question 10

Which requirement must be met while using parameter with conditional matching in routing policy definition?

  • A. Parameters must be used only in route maps
  • B. Parameters must start with the $ symbol
  • C. Parameters must be used in a hierarchal structure
  • D. Parameters must be applied only to BGP statements
Show Answer
Correct Answer:
B. Parameters must start with the $ symbol

300-510 sample questions FAQ

Are these 300-510 sample questions from the real exam?

No. They are original practice questions written to match the format and topic mix of the Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) exam, which contains around 60 questions. Treat them as representative practice, not leaked exam content.

How many free 300-510 sample questions do I get?

This page includes 10 questions, each with its correct answer you can reveal in place. The full study PDF expands that to 34+ questions.

Do the sample questions include the correct answers?

Yes. Open the answer panel under each question to see which option is correct. Answer first, then reveal, so the set works as a self-check rather than a reading exercise.

Is 10 sample questions enough to pass the 300-510?

Not on its own. Use the samples to find weak topics, revise them against the official domains, then work through the full 34+ question set under timed conditions before booking the exam.

Aced these? Get the Full Exam

Download the complete 300-510 study bundle with 34+ questions in a single printable PDF.

Purchase Full Exam PDF | $5