Free NSE6_FSW-7.2 Sample Questions — Fortinet NSE 6 - FortiSwitch 7.2

Fortinet NSE 6 - FortiSwitch 7.2 (NSE6_FSW-7.2) is a nse 6-level Fortinet certification exam. The blueprint splits the exam across 5 domains, starting with FortiSwitch deployment and management, VLAN and switching configuration, PoE and power management. On exam day you face around 32 questions in 70 minutes, in formats such as multiple choice. The 10 questions below are free samples written to match that style: answer each one first, then reveal the correct answer and note which topics you miss. The NSE6_FSW-7.2 is rated advanced in difficulty, and most candidates prepare with at least 24 months of hands-on experience. Because every answer is revealed in place, you can work through the whole set without leaving this page. Work through all 10 samples before deciding whether to buy the full 31+ question PDF.

  • 10 free questions
  • 70 min
  • $200 official fee
  • blueprint v7.2
  • Every free question shows the correct answer
  • Questions follow the official 5-domain blueprint
  • No account or email required
  • 31+ questions in the full PDF

Looking for more? Click here to get the full PDF with 31+ practice questions for $5 for offline study and deeper preparation.

Question 1

How does FortiSwitch perform actions on ingress and egress traffic using the access control list (ACL)?

  • A. Only high-end FortiSwitch models support ACL
  • B. ACL can be used only at the prelookup stage in the traffic processing pipeline
  • C. Classifiers enable matching traffic based only on the VLAN ID
  • D. FortiSwitch checks ACL policies only from top to bottom
Show Answer
Correct Answer:
D. FortiSwitch checks ACL policies only from top to bottom
Question 2

In which two ways can you assign a FortiSwitch port to a VDOM using multi-tenancy setup? (Choose two.)

  • A. Assign a port to a VDOM directly on the managed FortiSwitch
  • B. Create a virtual port pool on the FortiGate CLI
  • C. Remove the managed FortiSwitch and allocate ports directly on FortiSwitch
  • D. Switch the FortiLink interface to the target VDOM
Show Answer
Correct Answer:
  • A. Assign a port to a VDOM directly on the managed FortiSwitch
  • B. Create a virtual port pool on the FortiGate CLI
Question 3

How does flow tracking work on FortiSwitch if you export the settings to a managed FortiSwitch stack with sampling mode set to local?

  • A. FortiGate does not change existing sampling settings of interfaces
  • B. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces
  • C. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces, except ICL and ISL interfaces
  • D. FortiGate turns egress sampling on all management interfaces
Show Answer
Correct Answer:
A. FortiGate does not change existing sampling settings of interfaces
Question 4

What can an administrator do to maintain a Forti-Gate-compatible FortiSwitch configuration when changing the management mode from standalone to FortiLink?

  • A. Use a migration tool based on Python script to convert the configuration
  • B. Enable the FortiLink setting on FortiSwitch before the authorization process
  • C. FortiGate automatically saves the existing FortiSwitch configuration during the FortiLink management process
  • D. Register FortiSwitch to FortiSwitch Cloud to save a copy before managing with FortiGate
Show Answer
Correct Answer:
A. Use a migration tool based on Python script to convert the configuration
Question 5

Which feature should enable to reduce the number of unwanted IGMP reports processed by the IGMP querier?

  • A. Enable IGMP snooping proxy
  • B. Enable the IGMP flood setting on the static port for all multicast groups
  • C. Enable the IGMP flood reports setting on the mRouter port
  • D. Enable IGMP flood unknown multicast traffic on the global setting
Show Answer
Correct Answer:
A. Enable IGMP snooping proxy
Question 6

Which drop policy mode, if assigned to a congested port, will drop incoming packets until there is no congestion on the egress port?

  • A. Tail-drop mode
  • B. Weighted round robin mode
  • C. Random early detection mode
  • D. Strict mode
Show Answer
Correct Answer:
A. Tail-drop mode
Question 7

Which Ethernet frame can create Layer 2 flooding due to all bytes on the destination MAC address being set to all FF?

  • A. The broadcast Ethernet frame
  • B. The unicast Ethernet frame
  • C. The multicast Ethernet frame
  • D. The anycast Ethernet frame
Show Answer
Correct Answer:
A. The broadcast Ethernet frame
Question 8

Which statement about the IGMP snooping querier when enabled on a VLAN is true?

  • A. IGMP reports on the VLAN are forwarded to all switch ports
  • B. Active multicast receiver entries are aging on each IGMP query sent on the VLAN
  • C. The setting can only be enabled using the FortiSwitch CLI
  • D. All other indirectly connected switches will be unable to get IGMP multicast traffic
Show Answer
Correct Answer:
C. The setting can only be enabled using the FortiSwitch CLI
Question 9

Which statement about the quarantine VLAN on FortiSwitch is true?

  • A. Quarantine VLAN has no DHCP server
  • B. Users who fail 802.1X authentication can be placed on the quarantine VLAN
  • C. It is only used for quarantined devices if global setting is set to quarantine by VLAN
  • D. FortiSwitch can block devices without configuring quarantine VLAN to be part of the allowed VLANs
Show Answer
Correct Answer:
B. Users who fail 802.1X authentication can be placed on the quarantine VLAN
Question 10

Which LLDP-MED Type-Length-Values does FortiSwitch collect from endpoints to track network devices and determine their characteristics?

  • A. Network policy
  • B. Power management
  • C. Location
  • D. Inventory management
Show Answer
Correct Answer:
D. Inventory management

NSE6_FSW-7.2 sample questions FAQ

Are these NSE6_FSW-7.2 sample questions from the real exam?

No. They are original practice questions written to match the format and topic mix of the Fortinet NSE 6 - FortiSwitch 7.2 exam, which contains around 32 questions. Treat them as representative practice, not leaked exam content.

How many free NSE6_FSW-7.2 sample questions do I get?

This page includes 10 questions, each with its correct answer you can reveal in place. The full study PDF expands that to 31+ questions.

Do the sample questions include the correct answers?

Yes. Open the answer panel under each question to see which option is correct. Answer first, then reveal, so the set works as a self-check rather than a reading exercise.

Is 10 sample questions enough to pass the NSE6_FSW-7.2?

Not on its own. Use the samples to find weak topics, revise them against the official domains, then work through the full 31+ question set under timed conditions before booking the exam.

Aced these? Get the Full Exam

Download the complete NSE6_FSW-7.2 study bundle with 31+ questions in a single printable PDF.

Purchase Full Exam PDF | $5