Free NSE7_SDW-6.4 Sample Questions — Fortinet NSE 7 - SD-WAN 6.4

Fortinet NSE 7 - SD-WAN 6.4 (NSE7_SDW-6.4) is a nse 7-level Fortinet certification exam. The questions are drawn from the official exam topics and change in focus depending on the current blueprint. On exam day you face around 38 questions in 75 minutes, in formats such as multiple choice. The 15 questions below are free samples written to match that style: answer each one first, then reveal the correct answer and note which topics you miss. Treat the set as a diagnostic: anything you get wrong points at a topic worth revising before you book the real exam. Because every answer is revealed in place, you can work through the whole set without leaving this page. Work through all 15 samples before deciding whether to buy the full 41+ question PDF.

  • 15 free questions
  • 75 min
  • $200 official fee
  • blueprint v6.4
  • Every free question shows the correct answer
  • No account or email required
  • 41+ questions in the full PDF

Looking for more? Click here to get the full PDF with 41+ practice questions for $10 for offline study and deeper preparation.

Question 1

Which feature enables SD-WAN to combine IPsec VPN dynamic shortcut tunnels between spokes and a static tunnel to the hub?

  • A. ADVPN
  • B. GRE
  • C. SSLVPN
  • D. OCVPN
Show Answer
Correct Answer:
A. ADVPN
Question 2

In which two ways does FortiGate learn the FortiManager IP address or FQDN for zero-touch provisioning? (Choose two.)

  • A. From a FortiGuard definitions update
  • B. From the central management configuration configured in FortiDeploy
  • C. From a DHCP server configured with options 240 or 241
  • D. From another FortiGate device in the same local network
Show Answer
Correct Answer:
  • B. From the central management configuration configured in FortiDeploy
  • C. From a DHCP server configured with options 240 or 241
Question 3

Which two reasons make forward error correction (FEC) ideal to enable in a phase one VPN interface? (Choose two.)

  • A. FEC is useful to increase speed at which traffic is routed through IPsec tunnels
  • B. FEC transmits the original payload in full to recover the error in transmission
  • C. FEC transmits additional packets as redundant data to the remote device
  • D. FEC improves reliability, which overcomes adverse WAN conditions such as noisy links
  • E. FEC reduces the stress on the remote device jitter buffer to reconstruct packet loss
Show Answer
Correct Answer:
  • C. FEC transmits additional packets as redundant data to the remote device
  • D. FEC improves reliability, which overcomes adverse WAN conditions such as noisy links
Question 4

Which statement is correct about SD-WAN and ADVPN?

  • A. You must use OSPF
  • B. SD-WAN can steer traffic to ADVPN shortcuts established over IPsec overlays configured as SD-WAN members
  • C. Routes for ADVPN shortcuts must be manually configured
  • D. SD-WAN does not monitor the health and performance of ADVPN shortcuts
Show Answer
Correct Answer:
B. SD-WAN can steer traffic to ADVPN shortcuts established over IPsec overlays configured as SD-WAN members
Question 5

Which statement reflects how BGP tags work with SD-WAN rules?

  • A. VPN topologies are formed using only BGP dynamic routing with SD-WAN
  • B. Route tags are used for a BGP community and the SD-WAN rules are assigned the same tag
  • C. BGP tags require that the adding of static routes be enabled on all ADVPN interfaces
  • D. BGP tags match the SD-WAN rule based on the order that these rules were installed
Show Answer
Correct Answer:
B. Route tags are used for a BGP community and the SD-WAN rules are assigned the same tag
Question 6

Which CLI command do you use to perform real-time troubleshooting for ADVPN negotiation?

  • A. get ipsec tunnel list
  • B. get router info routing-table
  • C. diagnose debug application ike
  • D. diagnose sys virtual-wan-link service
Show Answer
Correct Answer:
C. diagnose debug application ike
Question 7

In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two.)

  • A. Traffic has matched none of the FortiGate policy routes
  • B. Matched traffic failed RPF and was caught by the rule
  • C. The FIB lookup resolved interface was the SD-WAN interface
  • D. An absolute SD-WAN rule was defined and matched traffic
Show Answer
Correct Answer:
  • A. Traffic has matched none of the FortiGate policy routes
  • C. The FIB lookup resolved interface was the SD-WAN interface
Question 8

Which two benefits from using forward error correction (FEC) in IPsec VPNs are true? (Choose two.)

  • A. FEC transmits the original payload in full to recover the error in transmission
  • B. FEC reduces the stress on the remote device buffer to reconstruct packet loss
  • C. FEC transmits additional packets as redundant data to the remote device
  • D. FEC improves reliability, which overcomes adverse WAN conditions such as noisy links
Show Answer
Correct Answer:
  • C. FEC transmits additional packets as redundant data to the remote device
  • D. FEC improves reliability, which overcomes adverse WAN conditions such as noisy links
Question 9

Which two interfaces are considered overlay links? (Choose two.)

  • A. IPsec
  • B. Physical
  • C. LAG
  • D. GRE
Show Answer
Correct Answer:
  • A. IPsec
  • D. GRE
Question 10

What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)

  • A. The FortiGate cloud key has not been added to the FortiGate cloud portal
  • B. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
  • C. FortiGate has obtained a configuration from the platform template in FortiGate cloud
  • D. factory reset performed on FortiGate
  • E. The zero-touch provisioning process has completed internally, behind FortiGate
Show Answer
Correct Answer:
  • A. The FortiGate cloud key has not been added to the FortiGate cloud portal
  • E. The zero-touch provisioning process has completed internally, behind FortiGate
Question 11

Why is it effective to use SD-WAN rules when configuring application control?

  • A. Because you must use certificate full inspection on the firewall policy
  • B. Because the application database is manually maintained by administrators
  • C. Because traffic can be steered based on application type
  • D. Because SD-WAN rules are independent from firewall policies to avoid controlling applications
Show Answer
Correct Answer:
C. Because traffic can be steered based on application type
Question 12

Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two.)

  • A. It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links
  • B. It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance
  • C. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub
  • D. It provides direct connectivity between all sites by creating on-demand tunnels between spokes
Show Answer
Correct Answer:
  • C. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub
  • D. It provides direct connectivity between all sites by creating on-demand tunnels between spokes
Question 13

Which three performance SLA protocols are available on the FortiGate CLI only? (Choose three.)

  • A. tcp-echo
  • B. icmp
  • C. twamp
  • D. udp-echo
  • E. smtp
Show Answer
Correct Answer:
  • A. tcp-echo
  • C. twamp
  • D. udp-echo
Question 14

Which two statements about SLA targets and SD-WAN rules are true? (Choose two.)

  • A. Member metrics are measured only if an SLA target is configured
  • B. SLA targets are used only by SD-WAN rules that are configured with Lowest Cost (SLA) or Maximize Bandwidth (SLA) as strategy
  • C. When configuring an SD-WAN rule, you can select multiple SLA targets of the same performance SLA
  • D. SD-WAN rules use SLA targets to check if the preferred members meet the SLA requirements
Show Answer
Correct Answer:
  • B. SLA targets are used only by SD-WAN rules that are configured with Lowest Cost (SLA) or Maximize Bandwidth (SLA) as strategy
  • D. SD-WAN rules use SLA targets to check if the preferred members meet the SLA requirements
Question 15

Which statement is correct about the SD-WAN and ADVPN?

  • A. Spoke support dynamic VPN as a static interface
  • B. Dynamic VPN is not supported as an SD-WAN interface
  • C. ADVPN interface can be a member of SD-WAN interface
  • D. Hub FortiGate is limited to use ADVPN as SD-WAN member interface
Show Answer
Correct Answer:
C. ADVPN interface can be a member of SD-WAN interface

NSE7_SDW-6.4 sample questions FAQ

Are these NSE7_SDW-6.4 sample questions from the real exam?

No. They are original practice questions written to match the format and topic mix of the Fortinet NSE 7 - SD-WAN 6.4 exam, which contains around 38 questions. Treat them as representative practice, not leaked exam content.

How many free NSE7_SDW-6.4 sample questions do I get?

This page includes 15 questions, each with its correct answer you can reveal in place. The full study PDF expands that to 41+ questions.

Do the sample questions include the correct answers?

Yes. Open the answer panel under each question to see which option is correct. Answer first, then reveal, so the set works as a self-check rather than a reading exercise.

Is 15 sample questions enough to pass the NSE7_SDW-6.4?

Not on its own. Use the samples to find weak topics, revise them against the official domains, then work through the full 41+ question set under timed conditions before booking the exam.

Aced these? Get the Full Exam

Download the complete NSE7_SDW-6.4 study bundle with 41+ questions in a single printable PDF.

Purchase Full Exam PDF | $10