Free JN0-349 Sample Questions — Enterprise Routing and Switching, Specialist (JNCIS-ENT)

Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-349) is a specialist-level Juniper certification exam. The blueprint splits the exam across 6 domains, starting with Layer 2 Switching, Layer 3 Routing, Spanning Tree. On exam day you face around 65 questions in 90 minutes, in formats such as multiple choice. The 10 questions below are free samples written to match that style: answer each one first, then reveal the correct answer and note which topics you miss. The JN0-349 is rated medium in difficulty, and most candidates prepare with at least 12 months of hands-on experience. Because every answer is revealed in place, you can work through the whole set without leaving this page. Work through all 10 samples before deciding whether to buy the full 36+ question PDF.

  • 10 free questions
  • 90 min
  • $300 official fee
  • blueprint vcurrent
  • Every free question shows the correct answer
  • Questions follow the official 6-domain blueprint
  • No account or email required
  • 36+ questions in the full PDF

Looking for more? Click here to get the full PDF with 36+ practice questions for $5 for offline study and deeper preparation.

Question 1

Which two statements about BPDU protection are correct? (Choose two.)

  • A. By default, you must manually clear a BPDU error condition when using BPDU protection
  • B. BPDU protection prevents unauthorized switches from connecting to and participating in your spanning tree topology
  • C. By default, BPDU protection prevents the root bridge from communicating with other STP members unless it receives a superior BPDU first
  • D. BPDU protection requires that STP or RSTP is configured on the switch
Show Answer
Correct Answer:
  • A. By default, you must manually clear a BPDU error condition when using BPDU protection
  • B. BPDU protection prevents unauthorized switches from connecting to and participating in your spanning tree topology
Question 2

Which two statements are true regarding RIB groups? (Choose two.)

  • A. The first table listed is the primary route table and determines the address family of the RIB group
  • B. The last table listed is the primary route table and determines the address family of the RIB group
  • C. RIB group must contain one or more export-rib statements
  • D. RIB group must contain one or more import-rib statements
Show Answer
Correct Answer:
  • A. The first table listed is the primary route table and determines the address family of the RIB group
  • D. RIB group must contain one or more import-rib statements
Question 3

Your BGP router receives routes from two upstream ISPs: ISP A and ISP B. In this scenario, which change would you make to prefer routes from ISP A?

  • A. Set the local-preference attribute for all routes received from ISP A to 200 while all routes received from ISP B use the default local-preference value of 100
  • B. Prepend the AS path to all routes received from ISP A while all routes received from ISP B use the default AS path value
  • C. Change the MED value for all routes received from ISP A to 1 while all routes from ISP B remain configured with no MED value
  • D. Set the local-preference attribute for all routes received from ISP A to 50 while all routes received from ISP B use the default local-preference value of 100
Show Answer
Correct Answer:
A. Set the local-preference attribute for all routes received from ISP A to 200 while all routes received from ISP B use the default local-preference value of 100
Question 4

By default, how long will a learned MAC address be retained in the bridge table on an EX Series switch?

  • A. 600 seconds
  • B. 3600 seconds
  • C. 300 seconds
  • D. 1800 seconds
Show Answer
Correct Answer:
C. 300 seconds
Question 5

You must limit access to a printer with a persistent DHCP address of 2001:db8:0000:50::10/64 in VLAN v50 to users assigned to VLAN v50 only. Which action would satisfy this requirement?

  • A. Implement persistent MAC learning to ensure that 2001:db8:0000:50::10 is allocated properly
  • B. Implement a firewall filter on the IRB interface for VLAN v50, blocking traffic to/from 2001:db8:0000:50::10
  • C. Implement a firewall filter on the VLAN v50, blocking traffic to/from 2001:db8:0000:50::10
  • D. Implement DHCP snooping on VLAN v50 to ensure that 2001:db8:0000:50::10 is allocated properly
Show Answer
Correct Answer:
B. Implement a firewall filter on the IRB interface for VLAN v50, blocking traffic to/from 2001:db8:0000:50::10
Question 6

You have an IBGP neighbor sending you routes. You need to apply a policy so it only evaluates routes being learned from this specific neighbor. In this scenario, which statement is correct about applying the policy?

  • A. The policy should be applied as an export policy to the BGP group level
  • B. The policy should be applied as an import policy to the BGP group level
  • C. The policy should be applied as an export policy to the BGP neighbor level
  • D. The policy should be applied as an import policy to the BGP neighbor level
Show Answer
Correct Answer:
D. The policy should be applied as an import policy to the BGP neighbor level
Question 7

On EX Series devices, what are two software features that accommodate redundancy? (Choose two.)

  • A. OAM
  • B. NSR
  • C. IGMP
  • D. GRES
Show Answer
Correct Answer:
  • B. NSR
  • D. GRES
Question 8

Which OSPF area type receives only the default route from the backbone?

  • A. transmit area
  • B. totally stubby area
  • C. not so stubby area
  • D. stub area
Show Answer
Correct Answer:
B. totally stubby area
Question 9

Which three link-specific fields must match between OSPF neighbors before they form an adjacency over a broadcast medium? (Choose three.)

  • A. router priority
  • B. hello interval
  • C. neighbor
  • D. dead interval
  • E. options
Show Answer
Correct Answer:
  • B. hello interval
  • D. dead interval
  • E. options
Question 10

Which two statements about a Virtual Chassis are correct? (Choose two.)

  • A. Virtual Chassis is managed using a single virtual console port
  • B. You must use the same EX Series switch for all members in a Virtual Chassis
  • C. All members in a Virtual Chassis must be running the same Junos version
  • D. Each device must be managed separately
Show Answer
Correct Answer:
  • A. Virtual Chassis is managed using a single virtual console port
  • C. All members in a Virtual Chassis must be running the same Junos version

JN0-349 sample questions FAQ

Are these JN0-349 sample questions from the real exam?

No. They are original practice questions written to match the format and topic mix of the Enterprise Routing and Switching, Specialist (JNCIS-ENT) exam, which contains around 65 questions. Treat them as representative practice, not leaked exam content.

How many free JN0-349 sample questions do I get?

This page includes 10 questions, each with its correct answer you can reveal in place. The full study PDF expands that to 36+ questions.

Do the sample questions include the correct answers?

Yes. Open the answer panel under each question to see which option is correct. Answer first, then reveal, so the set works as a self-check rather than a reading exercise.

Is 10 sample questions enough to pass the JN0-349?

Not on its own. Use the samples to find weak topics, revise them against the official domains, then work through the full 36+ question set under timed conditions before booking the exam.

Aced these? Get the Full Exam

Download the complete JN0-349 study bundle with 36+ questions in a single printable PDF.