Free FlashArray Implementation Specialist Sample Questions — Pure Certified FlashArray Implementation Specialist

Pure Certified FlashArray Implementation Specialist (FlashArray Implementation Specialist) is a specialist-level Pure Storage certification exam. The questions are drawn from the official exam topics and change in focus depending on the current blueprint. On exam day you face around 37 questions. The 10 questions below are free samples written to match that style: answer each one first, then reveal the correct answer and note which topics you miss. Treat the set as a diagnostic: anything you get wrong points at a topic worth revising before you book the real exam. Because every answer is revealed in place, you can work through the whole set without leaving this page. Work through all 10 samples before deciding whether to buy the full 37+ question PDF.

  • 10 free questions
  • $5 official fee
  • Every free question shows the correct answer
  • No account or email required
  • 37+ questions in the full PDF

Looking for more? Click here to get the full PDF with 37+ practice questions for $5 for offline study and deeper preparation.

Question 1

What command should be used to check the shelf cable connections?

  • A. purearray list --shelf
  • B. purehw list --enclosures
  • C. storage_view.py config
Show Answer
Correct Answer:
C. storage_view.py config
Question 2

An Implementation Engineer needs to run the puresetup replace procedure on the FlashArray//X during a controller upgrade. Which command should the Implementation Engineer run on the new controller to determine its model?

  • A. hwconfig --all
  • B. hwconfig --model
  • C. purearray list --controller
Show Answer
Correct Answer:
B. hwconfig --model
Question 3

An Implementation Engineer is beginning a controller upgrade. Which command should be run to stop Purity?

  • A. pureadm stop
  • B. pureadm stop --secondary
  • C. pureadm stop --controller CT0
Show Answer
Correct Answer:
A. pureadm stop
Question 4

For FlashArray//XL, which PCIe card slot is reserved for control upgrades?

  • A. 5
  • B. 6
  • C. 7
Show Answer
Correct Answer:
A. 5
Question 5

What slot does a PCIe SAS card need to be installed in a FlashArray//XR2/3?

  • A. 0
  • B. 1
  • C. 2
Show Answer
Correct Answer:
B. 1
Question 6

What is the maximum number of DirectFlash Shelves supported for FlashArray//XL?

  • A. 2
  • B. 3
  • C. 4
Show Answer
Correct Answer:
A. 2
Question 7

When executing a FlashArray upgrade from the FA-405 to a FA-X Series, into which slot on CT1 must the 2 Port InfiniBand Card be installed?

  • A. 0
  • B. 2
  • C. 3
Show Answer
Correct Answer:
C. 3
Question 8

Before installing array rails, where should the cage nuts be placed?

  • A. Lowest square of lowest RU
  • B. Lowest square of top RU
  • C. Top square of the lowest RU
Show Answer
Correct Answer:
C. Top square of the lowest RU
Question 9

What hardware should the Implementation Engineer find in the upgrade kit in order to perform an //X to //XL NDU?

  • A. 2 QSFP cables / 3 Mellanox cards / 20 DFMDs
  • B. 3 QSFP cables / 4 Mellanox cards / 10 DFMDs
  • C. 4 QSFP cables / 2 Mellanox cards / 20 DFMDs
Show Answer
Correct Answer:
A. 2 QSFP cables / 3 Mellanox cards / 20 DFMDs
Question 10

After upgrading Purity during a new installation, which command should an Implementation Engineer run to determine what version of Purity will be loaded at the next boot of the FlashArray?

  • A. purearray list --controller
  • B. pureversion -a
  • C. pureboot list
Show Answer
Correct Answer:
B. pureversion -a

FlashArray Implementation Specialist sample questions FAQ

Are these FlashArray Implementation Specialist sample questions from the real exam?

No. They are original practice questions written to match the format and topic mix of the Pure Certified FlashArray Implementation Specialist exam, which contains around 37 questions. Treat them as representative practice, not leaked exam content.

How many free FlashArray Implementation Specialist sample questions do I get?

This page includes 10 questions, each with its correct answer you can reveal in place. The full study PDF expands that to 37+ questions.

Do the sample questions include the correct answers?

Yes. Open the answer panel under each question to see which option is correct. Answer first, then reveal, so the set works as a self-check rather than a reading exercise.

Is 10 sample questions enough to pass the FlashArray Implementation Specialist?

Not on its own. Use the samples to find weak topics, revise them against the official domains, then work through the full 37+ question set under timed conditions before booking the exam.

Aced these? Get the Full Exam

Download the complete FlashArray Implementation Specialist study bundle with 37+ questions in a single printable PDF.

Purchase Full Exam PDF | $5